*Micro ELD Device for Trucks

Designed to handle a large number of known vehicle-specification deviations in the field, the Micro ELD provides robust data acquisition across a wide range of makes and models.

Data gathered by the Micro ELD can be transferred to a phone or tablet via a Bluetooth or WiFi connection, enabling trouble-free hours-tracking and document submission. You can connect this device directly to the J1939 port found in most heavy-duty trucks, or easily adapt it to RP1226, OBD-II, or J1708 with a converter cable. 

KEY SPECIFICATIONS

Built-in J1939 Type II 9-pin connector supporting both new and legacy vehicles

WiFi 801.11b/g/n up to 150Mbps and simultaneous AP and Station modes

Bluetooth 4.2 Class 1 supporting BR/EDR and LE dual-mode

Multi-constellation GNSS receiver with built-in high-gain antenna

Features

WiFi 801.11b/g/n up to 150Mbps and simultaneous AP and Station modes

Bluetooth 4.2 Class 1 supporting BR/EDR and LE dual-mode

Multi-constellation GNSS receiver with built-in high-gain antenna

High-efficiency switching power supplies for low temperature operation

Over-, under-, and reverse-voltage protection exceeding automotive standards

ESD protection exceeding automotive standards

Full-color RGB LED for status indication

Dual-core 32-bit Tensilica processor at 240MHz

Built-in J1939 Type II 9-pin connector supporting both new and legacy vehicles

Physical layer and protocol auto-detection/auto-bauding

Dual-wire CAN interface supporting 1Mbps [1]

Dual-wire J1708 interface

J1939 protocol support

ISO 15765 and ISO 14229 (OBD-II) protocol support

J1587 protocol support

Built-in flash memory

Support for IOSiX ELD APIs for Android and iOS

Support for IOSiX Advanced Vehicle Parameter Database

FCC/IC (US/Canada and other countries)

CE (Europe and other regions)

Dimensions: 40x40x28mm

Mass: 28g

Temperature range: -40 to +125 C

Material: Nylon/Polycarbonate